Diffraction techniques for nonlamellar phases of phospholipids

A neutron diffraction method applicable to nonlamellar phases of substrate-supported lipid membranes is described and validated. When prepared on a flat substrate, the resulting nonlamellar phases have layered symmetry which provides some advantages over powder diffraction for detailed structure determination. This approach recently led to the detection of a rhombohedral phase and a distorted hexagonal phase of lipids. Here the determination of intensity and phase information for such phases is demonstrated by application to the hexagonal phase of diphytanoyl phosphatidylcholine (DPhPC). The hexagonal symmetry is used to verify the data reduction procedure for the intensities of the diffraction peaks. Diffraction intensities measured while varying the D2O/H2O ratio in the relative humidity was used to solve the phase problem. The neutron scattering length density distribution of the hexagonal phase was constructed and analyzed to elucidate the packing of the lipid molecules. The structure of DPhPC in the hexagonal phase is of interest in connection with its stalk structure in the rhombohedral phase. We also found that the incorporation of tetradecane into the DPhPC hexagonal phase is limited, similar to the case for dioleoyl phosphatidylethanolamine.     

Improving the quality of 3D-QSAR by using flexible-ligand receptor models

To address the problems associated with molecular conformations and alignments in the 3D-QSAR studies, we have developed the Flexible Ligand - Atomic Receptor Model (FLARM) 2.0 method. The FLARM 2.0 method has three unique features as compared to other pseudoreceptor model methods: (1) the training ligands are flexibly optimized inside the receptors to achieve minimal docking energies; (2) the receptor atoms are spatially moveable in the process of genetic evolving in order to avoid improper initial receptor shapes; and (3) void receptor sites are specially favored in order to obtain open receptor models that allow large gaps. Advantages of an open model include less noise information, a smaller risk of overfitting, and ease of locating the key interaction sites. The latter two features, inherited from the previous FLARM 1.0 method, can improve the predictive ability of the 3D-QSAR models, while the first feature is newly implemented to relieve the uncertainty caused by improper conformation and alignment. Three FLARM 2.0 case studies were performed, and the results show that FLARM 2.0 models are highly predictive and robust. FLARM 2.0 pseudoreceptor models can correspond well with the pharmacophore models and/or the binding sites of the real protein receptors.     

Studies on the thermotropic liquid crystalline polymer. VII. Synthesis and properties of photocrosslinkable poly(ether-ester) containing cinnamic group

A series of semi-aromatic poly(ether-ester)s containing cinnamic group was prepared from 4,4′-diacrylic acid-α,ω-phenoxyalkanes with diols in the presence of diphenylchlorophosphate (DPCP) and pyridine as a catalyst and solvent. The phase behavior of these polymers was studied by differential scanning calorimetry (DSC), optical polarizing microscopy equipped with a heating stage, and wide-angle x-ray diffraction (WAXD). All of the poly(ether-ester)s, except P3 , show nematic or smectic thermotropic liquid crystalline behaviour under optical polarizing microscopic observation. These polymers can undergo photocrosslinking reaction upon heating, as examined by IR, solubility, and DSC analysis. © 1993 John Wiley & Sons, Inc.     

Effect of transition metals (Cr, Mn, Fe, Co, Ni and Cu) on selective hydrogenation of cinnamaldehyde over Pt/CNTs catalyst

Summary The effect of transition metals (Cr, Mn, Fe, Co, Ni and Cu) on the selective hydrogenation of cinnamaldehyde (CMA) to the corresponding semi-hydrogenated product over Pt/CNTs catalyst has been studied in ethanol at 343 K under 2.0 MPa H₂ pressure. PtNi/CNTs catalyst shows good catalytic activity and selectivity of C=C bond hydrogenation, 68.4% for conversion of CMA and 97.0% for selectivity of hydrocinnamaldehyde (HCMA). PtCo/CNTs catalyst shows good catalytic activity and selectivity of C=O bond hydrogenation, 91.3% for conversion of CMA and 88.2% for selectivity of cinnamylalcohol (CMO).     

Effect of the polarity of additional solvent on membrane formation in polysulfone/N-methyl-2-pyrrolidone/water ternary system

Asymmetric polysulfone membranes were prepared by wet phase inversion method with different demixing rate of casting solutions. The influent factor of demixing rate was focused on the polarity of additive in the polysulfone/N-methyl-2-pyrrolidone/water ternary system. With increasing the polarity of alcohols in the casting solution, the decrease in skin layer thickness was observed and then a poor separation performance of membranes can be obtained. It was found that the polar additive caused the rapidly demixing of casting solution in coagulation bath and formed porous asymmetric membranes with defective skin layer. In the other case, chloroform was used as the non-polar additive in casting solution. With increasing the mount of chloroform in the casting solution, the increase in skin layer thickness was observed and then lead to a good separation performance of these membranes. It was found that of the non-polar additive delays the demixing rate of casting solution in this ternary system. The separation performance of these asymmetric membranes were characterized by the measurement of dehydration of ethanol/water mixture by pervaporation and observed the morphology by scanning electron microscopy. It was found that the separation performance of asymmetric polysulfone membrane strongly depends on the polarity of adding solvent in polysulfone/N-methyl-2-pyrrolidone/water ternary system.     

Arylcarbamoylated allylcarbamido-β-cyclodextrin: synthesis and immobilization on nonfunctionalized silica gel as a chiral stationary phase

Four new chiral stationary phases based on mono-(6^A-allylcarbamido-6^A-deoxy)-arylcarbamoylated β-cyclodextrin were synthesized. The chiral stationary phase of phenylcarbamoylated β-cyclodextrin exhibited excellent separation capability for a variety of chiral compounds. Compared with the previous work, it was found that the spacer remained on the surface of the silica gel and decreased the enantioseparation capability.     

Polarographic Behaviour and Determination of Stability Constants of Uranyl-Ascorbate Complex

The complex species of UO₂(HA)(H₂A)⁺ and UO₂(HA)₂ were identified in the ascorbic acid solution of uranyl ion at pH<2.1 and pH>2.1, respectively. Polarographic wave was proved to be the simultaneous reduction of UO₂⁺² and UO₂(HA)(H₂A)⁺ at pH <2.1. However, at pH>2.1, the wave is due to the reduction of U0₂(HA)₂ The stability constants of the two complex species were found to be 5.1×10⁺ and 1.0×10⁵, respectively. The hydrolysis constant of uranyl ion in the solution of ascorbic acid was determined.     

Convenient synthesis of mono(6-N-allylamino-6-deoxy)permethylated β-cyclodextrin: a promising chiral selector for an HPLC chiral stationary phase

Mono(6-(p-toluenesulfonyl))permethylated β-cyclodextrin, a versatile precursor for a wide variety of mono-functionalized permethyl β-cyclodextrins, has been generated successfully by the direct methylation of monotosylated cyclodextrin. This afforded a convenient synthesis of mono(6^A-N-allylamino-6^A-deoxy)permethylated β-cyclodextrin. Hydrosilylation of the chiral selector with (EtO)₃SiH and reaction of the resultant reactive siloxane with pristine silica gel afforded a facile entry into a structurally well-defined chiral HPLC stationary phase.     

The Constituents of Cynanchum Taiwanianum

The isolation and identification of eleven crystalline components from the aerial part of Cynanchum taiwanianum Yamazaki (Asclepiadaceae) are described. Their structures were determined on the basis of spectral evidence and chemical transformation. Besides caffeic acid, β-amyrin, and methyl phaeophorbide a, the isolated flavonoid components are classified into two groups, i.e. kaempferol derivatives (kaempferol, astragalin, afzelin, trifolin) and quercetin derivatives (quercetin, isoquercitrin, quercitrin, hyperin).     

DNA-PROTEIN CROSSLINKING IN NORMAL HUMAN SKIN FIBROBLASTS EXPOSED TO SOLAR ULTRAVIOLET WAVELENGTHS

Three normal human skin fibroblast cell lines were exposed to the simulated solar UV radiation produced by a fluorescent sunlamp under conditions in which the wavelength components shorter than either 295, 305 or 315 nm were excluded. The level of DNA-protein crosslinks (DPC) was then measured in those cells using the alkaline elution technique either immediately after irradiation or following a 24 h incubation. In each case, cells were exposed to fluences that induce similar levels of DPC. For cells exposed to 10 kJ m(-2) of sunlamp UV > 295 nm, the level of DPC exhibited a 2-5-fold increase following incubation. In contrast, 40-100% of the DPC were removed upon incubation of cells irradiated with either 100 kJ m(-2) of sunlamp UV > 305 nm or 150 kJ m(-2) of sunlamp UV > 315 nm. A major difference between the effects induced by these wavelength regions is that, in addition to DPC, a very high level of pyrimidine dimers is also produced by sunlamp UV > 295 nm, whereas much lower dimer yields result from treatment with either sunlamp UV > 305 nm or sunlamp UV > 315 nm. A potential role for type II DNA topoisomerase in the formation of these DPC resulting from either the change in conformational structure caused by the presence of a high level of dimers or an involvement of this enzyme in dimer excision repair is discussed.